Instructions for the installation of seals must pay attention to

Can not be forced to install. Some seals are placed in the grooved stuffing box. In this case, it needs to be tightly installed. It must not be rough during construction. The strong loading of the action will destroy the original prefabricated structure of the seal. It is very harmful to the seal. Such seals must be installed with great care and care, and the embedding must be carried out step by step.

Pay attention to balance and symmetry when installing. Place the seal at the position where the effective sealing surface is tightly fastened. After the system is opened for use, further observation and tightening of the sealing member are required to prevent the micro-leakage caused by the change of working conditions during the system working. Broken.

Do not damage the sealing surface or seal line on the seal surface. The sealing performance of hydraulic seals depends on the lip line associated with the hole or shaft. These parts are made of soft, resilience-resistant, temperature-resistant, corrosion-resistant, aging-resistant graphite, rubber, and fiber. The composition of the materials makes it necessary to give special protection and care during handling, installation and storage. Once damaged, it will leave a great hidden danger to the sealing parts.