Industry new

How to adjust the liquid turbine flowmeter when using

How should the liquid turbine flow meter be adjusted when it is used?

1. When using, keep the liquid to be tested clean and free of impurities such as fibers and particles.

2. When the sensor starts to use, the sensor should be slowly filled with liquid, and then the outlet valve should be opened. It is forbidden to be impacted by high-speed fluid when the sensor is in a liquid-free state.

3. When the sensor is not in use, the internal liquid should be cleaned, and a protective cover is added at both ends of the sensor to prevent dust from entering, and then stored in a dry place.

4. The transmission cable of the sensor can be laid overhead or buried (the iron pipe should be placed when buried)

5. The filter should be cleaned regularly when it is used. When not in use, the internal liquid should be cleaned. As with the sensor, add a dust jacket and store it in a dry place.

6. The maintenance period of the sensor is generally half a year. When cleaning and cleaning, please be careful not to damage the parts inside the measuring chamber, especially the impeller. Please be optimistic about the positional relationship between the guide and the impeller during assembly.

7. Before the sensor is installed, connect it to the display instrument or oscilloscope. Connect the power supply, use the mouth to blow or hand dial the impeller to make it rotate quickly to see if there is any display. Install the sensor when there is display. If there is no display, check the relevant parts and troubleshoot.

PREVIOUS：Description of the difference between the outNEXT：What is the impact of the accuracy of the ste