Industry new
Magnetic flap level gauge wiring operation notes introduction
The magnetic flap level gauge is suitable for liquid measurement in open or pressure vessels. It can achieve high sealing, anti-leakage and safe and reliable measurement of liquid level in high temperature, high pressure, high viscosity and strong corrosive conditions.
What are the precautions for the wiring operation of the magnetic flap level gauge? Before using the magnetic flap level gauge, the wiring of the magnetic flap level gauge should be done first. If the wiring is wrong, the measurement result will be inaccurate, and the serious damage will directly cause the instrument to be damaged. Therefore, we are wiring the operation. Be sure to pay attention to it.
When the magnetic flap level gauge is used for wiring operation, the following points need to be noted:
1. Avoid wiring large-capacity transformers, motors or interference sources when wiring;
2. For explosion-proof type, in order to ensure explosion-proof performance, it must be wired according to relevant regulations;
3. Unscrew the terminal cover of the junction box, and pass the cable through the cable connector to connect to both ends of 24VDC;
4. Connect the grounding terminal as needed;
5. Tighten the terminal cover of the junction box.
The above is some of the requirements and precautions for the wiring of the magnetic flap level gauge for everyone. I hope that through the above, we can correctly connect the magnetic flap level gauge in the future.
∷
KUNAG
KUNAG
KUNAGE