Turbine flowmeter maintenance points introduction
Welcome: KUNAG Fluid Control System (Shanghai) Co., Ltd.
Language: Chinese ∷  English
Search

Industry new

Turbine flowmeter maintenance points introduction

The turbine flow meter is a precision flow meter that can be used to measure the flow and total amount of liquid in conjunction with the corresponding flow meter. It is widely used in the measurement and control systems in the fields of petroleum, chemical, metallurgy and scientific research. Turbine flow sensors equipped with sanitary joints can be used in the pharmaceutical, food and other industries. The intelligent integrated turbine flowmeter is an explosion-proof design that displays total flow, instantaneous flow and full flow percentage. The battery adopts long-lasting lithium battery. The single-function integrated meter battery life can reach more than 5 years, and the multi-function display battery life can reach more than one year.
The maintenance of turbine flowmeter should pay attention to the following points:
1. When using, keep the measured medium clean and free of impurities such as fibers and particles.
2. When the turbine flowmeter is used, the sensor should be slowly filled with the medium and then the outlet valve should be opened. It is forbidden to be impacted by the high-speed fluid when the sensor is in the mediumless state.
3. The maintenance period of the turbine flow sensor is generally half a year. When cleaning and cleaning, please be careful not to damage the parts inside the measuring chamber, especially the impeller. Please be optimistic about the positional relationship between the guide and the impeller during assembly.
4. When the turbine flow sensor is not in use, the internal medium should be cleaned, and after drying, a protective cover is added at both ends of the sensor to prevent dust from entering, and then stored in a dry place.
5. The used filter should be cleaned regularly. When not in use, the internal medium should be cleaned. As with the sensor, add a dust jacket and store it in a dry place.
6. Before the sensor is installed, use the mouth to blow or hand the impeller to make it rotate quickly to see if there is any display. Install the sensor when there is display. If there is no display, check the relevant parts and troubleshoot.

CONTACT US

Contact: peng gong

Phone: 18918462396

Tel: 021-59718851

Email: kunage@126.com

Add: Lane 819, Qinghewan Road, Qingpu Industrial Park, Qingpu District, Shanghai

Scan the qr codeClose
the qr code