brand information

Novo crown triplet / two joint / assembly instructions

Norgren air source processor series triple/two-piece/assembly instructions:
1. There are two types of filter drainage: differential pressure drainage and manual drainage. When draining manually, it must be drained before the water level reaches the level below the filter element.
2. When adjusting the pressure, please pull up and then rotate before turning the knob, and press the rotary button to position. Turn the clockwise button to increase the outlet pressure and counterclockwise to lower the outlet pressure. Adjust the pressure gradually and evenly to the required pressure value, and should not be adjusted in one step.
3. How to use the oil feeder: oil feeder JIS K2213 oil (ISOVg32 or oil of the same grade). Please do not add more than eight points to the cup. The number O is the smallest amount of oil and 9 is the largest amount of oil. It cannot rotate from the position of 9-0 and must be rotated counterclockwise.

Norgren air source processor series triple/two-piece/assembly installation considerations:
1. Please pay attention to cleaning the connecting pipes and joints during installation to prevent dirt from entering the gas path.
2. Please pay attention to whether the direction of gas flow is consistent with the direction indicated by the arrow on the body during installation. Pay attention to whether the nozzle and connector are correct.
3. The filter and the pressure regulating valve (pressure regulating filter) are fixed to the oil feeder; the convex groove of the fixing bracket is matched with the concave groove on the body, and then the fixing piece and the screw are used for locking.
4. Fix the pressure regulator separately and adjust the filter separately; rotate the retaining ring to lock the attached special fixing piece.

PREVIOUS：Description of the working principle and clasNEXT：NORGREN one-way throttle valve application de