Industry new

How to operate the equipment to produce clips

How to operate the equipment to produce clips
1 The cloth film machine is switched on and the test run is started. Then it runs continuously and tests whether the electromagnetic brake and the parking mechanism are flexible.
2 Move the gearbox handle, change the speed ratio, test the two rotation speeds of the idler, and observe whether the rotation is
Abnormal, with or without noise. Rubber diaphragm manufacturers
3 Check whether the lubrication parts are normal, whether the bearings are overheated, and the bearing temperature should not exceed 65°C.
4 empty load test should not be less than 30min.
3) whether the load inspection is qualified
1 Place the piece of cloth film to be processed on the equipment, start the car and run it. After everything is normal, it can be solved according to the equipment requirements.
Water cloth, check whether the main idler and trolley operation is stable and coordinated. If the vibration is great, the transmission ratio of the nose V-belt can be changed.
In order to avoid the resonance area, the idler rolls smoothly at both speeds.
2 When the load test is carried out, the pipe diameter shall be Sa25, 4 to 330mm, and the large, medium, and small specifications shall be separately tested.
3 During the load test, the operation of the equipment should be continuously checked

PREVIOUS：Daily maintenance of pneumatic valves and diaNEXT：Composite diaphragm how to choose adhesive