Industry new

The importance of the safe operation of the electromagnetic flowmeter during operation

Electromagnetic flowmeter (unit: cubic meters per second) is a relatively simple instrument in flow measurement. It can be applied in many fields of measurement. Its practicality is also very strong, so people are more often. It will also be used at any time to play the necessary role of this instrument (expressing intrinsic ability).

What we understand is that the electromagnetic flowmeter (unit: cubic meters per second) can play a role (showing the inherent ability), and in the face of these tasks, we should also know how to do the safe operation control of the equipment, knowing that it is energized. The safe use of equipment and equipment used is the first element of use that needs to be met. The sewage flow meter consists of two parts: an electromagnetic flow sensor and a converter. It is based on Faraday's law of electromagnetic induction and is used to measure the volumetric flow of conductive liquid with conductivity greater than 5μS/cm. It is an inductive instrument for measuring the volumetric flow of conductive media.

The first step in safe use is that we should pay attention to whether the wiring of the inspection equipment is damaged before use. If there is damage, we should not use it to avoid unnecessary damage. . The electromagnetic flowmeter acts to produce a uniform DC or AC magnetic field. The DC magnetic circuit is realized by a permanent magnet, which has the advantages of simple structure and less interference by the alternating magnetic field, but it is easy to polarize the electrolyte liquid in the measuring duct, so that the positive electrode is surrounded by negative ions, and the negative electrode is positive ion Surrounding, that is, the polarization phenomenon of the electrode, and causing an increase in internal resistance between the two electrodes, thus seriously affecting the normal operation of the meter. The sewage flow meter consists of two parts: an electromagnetic flow sensor and a converter. It is based on Faraday's law of electromagnetic induction and is used to measure the volumetric flow of conductive liquid with conductivity greater than 5μS/cm. It is an inductive instrument for measuring the volumetric flow of conductive media.

After completing the inspection work, you can directly enter the use of the equipment, but in this process of use, we should also choose a suitable working voltage and a dry environment for it to avoid electric shock. .

Safe use is a very important issue, and it is the basis for our successful completion of the work, so this will be very important for us, and only then can we get the convenience of use in use.

PREVIOUS：How to generate a small signal of electromagnNEXT：What are the special inspection instructions