Industry new

Introduction to the selection of the diameter of the vortex flowmeter

The flow measured by the vortex sensor refers to the volume flow under working conditions. When the mass flow rate in the working state of the measured medium or the volume flow rate in the standard state is provided, it must be converted into the volume flow rate in the working state. Similarly, when the density in the standard state is provided, it must also be converted to the density in the working state.

Vortex flowmeter, diameter selection of vortex sensor
Follow fluid pipe selection
Select the vortex flowmeter with the corresponding diameter according to the inner diameter of the pipe, and the vortex sensor. If the flow rate of the measured medium is within the flow range determined in Article 4, then the selected vortex flowmeter, vortex sensor is suitable.
Select vortex flowmeter according to the flow range of the measured medium, vortex sensor
According to the maximum flow rate of the measured medium, select the sensor with the corresponding upper limit of the flow rate of the corresponding medium in Table 4, and then determine the minimum flow according to the method provided in Article 4. If the flow range of the measured medium is met, the selected vortex flowmeter, vortex sensor is suitable.

If the above requirements are not met, the other diameter of the Qingliu brand vortex flowmeter and vortex sensor should be re-selected to meet the flow range of the measured medium. When two types of vortex flowmeters, vortex sensors When all can be used, the vortex flowmeter with small diameter and the vortex sensor should be used.

PREVIOUS：Do you know how to adjust the range of the elNEXT：You know how to adjust the vortex flowmeter a