Industry new

What to pay attention to when using electromagnetic flowmeter

The development of electromagnetic flowmeters is becoming more and more intelligent. It is very simple in designing parameters and adjusting the range. It only needs to set specific numbers on the screen, which is very simple and convenient. The larger the diameter, the higher the price.

First, there will usually be a reset button and a confirmation button. Let us confirm this operation, or, let us re-set it. If not, change the working environment, select the reset button, and then re-set it. Liquid fluid parameters, flow rate and other aspects.

Second, after installing the electromagnetic flowmeter, we should, immediately, fill the pipeline with the medium, otherwise it is easy, resulting in damage to the machine, because the electronic lining of its lining must, also, the medium of contact, if Media If our electrodes are exposed to air, it will affect the life of the product. Therefore, it is necessary to work with the liquid, contact the electrode, and do not keep the pipe in a vacuum, which will reduce its service life.

Third, in the process of use, we should let the direction of fluid flow, and the direction of the product, the mark on the mark, and install it as much as possible, until the pipe is not installed, the bend, and there is, for the liquid inside, try to keep the contract Liquid with low viscosity, otherwise it may cause congestion of the pipeline. If the pipeline has a certain degree of vibration during the process of conveying the liquid, I have not fixed the pipeline at both ends of the electromagnetic flowmeter to prevent the data from being affected. accuracy.

PREVIOUS：Description of the definition of turbine flowNEXT：Plug-in electromagnetic flowmeter introductio