Industry new

Electromagnetic flowmeter you do not know the characteristics of the description

Electromagnetic Flowmeters (EMF) are new flow measuring instruments that developed rapidly with the development of electronic technology in the 1950s and 1960s. An electromagnetic flowmeter is an instrument that applies the principle of electromagnetic induction to measure the flow of a conductive fluid based on the electromotive force induced by the conductive fluid through an applied magnetic field.

1. Measurements are not affected by changes in fluid density, viscosity, temperature, pressure, and conductivity;

2. There is no obstructed flow component in the measuring tube, no pressure loss, and the requirements of the straight pipe section are low. Unique adaptability to slurry measurement;

3. Reasonable selection of sensor lining and electrode materials, that is, good corrosion resistance and wear resistance;

4. The converter adopts novel excitation mode, low power consumption, stable zero point and high precision. The flow range can reach 150:1;

5. The converter can be integrated with the sensor or separated;

6. The converter adopts 16-bit high-performance microprocessor, 2x16LCD display, convenient parameter setting and reliable programming;

7. The flowmeter is a two-way measuring system with three totalizers: positive total, reverse total and total difference; can display positive and negative flow, and has multiple outputs: current, pulse, digital communication , HART;

8, the converter uses surface mount technology (SMT), with self-test and self-diagnosis function;

9. Measurement accuracy is not affected by changes in fluid density, viscosity, temperature, pressure and conductivity. The sensor induced voltage signal has a linear relationship with the average flow velocity, so the measurement accuracy is high.

10. There is no obstruction in the measuring pipe, so there is no additional pressure loss; there is no moving parts in the measuring pipe, so the life of the sensor is extremely long.

11. Since the induced voltage signal is formed in the entire space filled with the magnetic field and is the average value on the pipeline surface, the sensor requires a short straight pipe section and a pipe diameter of 5 times.

12. The converter adopts the latest and most advanced single-chip microcomputer (MCU) and surface mount technology (SMT) in the world. It has reliable performance, high precision, low power consumption, stable zero point and convenient parameter setting. Click on the Chinese display LCD to display cumulative flow, instantaneous flow, flow rate, flow percentage, and more.

13, two-way measurement system, can measure forward flow, reverse flow. Special production processes and high-quality materials ensure that the performance of the product remains stable for a long time.

PREVIOUS：Where are the flowmeters often used in the fiNEXT：The advantages and disadvantages of electroma