Industry new

Electromagnetic flowmeter is inseparable from the function of the signal converter

Whether it's hardware or software, the new high-performance solutions for electromagnetic flowmeters can be defined as HI-TEC production lines that meet demanding customer requirements in terms of performance and accuracy.
The output signal is both an analog signal and a digital signal; and qualitatively, the instrument performs well, accuracy < reading ± 0.5%, repeatability is 0.1%
Electromagnetic flowmeters are also suitable for any liquid with a conductivity better than 5 & mu; S / cm; they are not sensitive to temperature and pressure changes, process fluid density or viscosity.
The advantages of electromagnetic flowmeters are:
Maximum control (also remote). The three can also provide the serial interface software that the PC can use and the RS232 (or RS485) port of the converter, so that the process parameters can be visualized and modified.
All electromagnetic flowmeters are equipped with a Sensoreprom unit that contains all calibration data for the sensor tubes and settings for all converters during the life of the product. Sensoreprom internally records manufacturing parameters and instrument dimensions as well as customer-set operating parameters. In the case of a tube change, Sensoreprom makes it very easy and fast.
    Use the same measuring tube and converter for great flexibility in compact or remote mode.
    For a complete electromagnetic flowmeter, you must combine the transducer of the electromagnetic flowmeter with a sensor tube of the Flanged, Wafer or DIN-Clamp-Gas model.
The electrical design provides the following outputs:
1 output 0 / 4-20mA, Hart protocol overlap (on request)
1 pulse output programmable, intelligent pulse length
No.: 2 relays for monitoring, dosing, PID adjustment, alarm
Serial RS485 or RS232; electrode cleaning (on request).
; Two digital inputs can also be used to activate the cumulative reset, accumulate the function block, automatically reset to zero, and start to stop metering.
The power supply can be used in the following ranges:
&17-45 Vac frequency 50/60 Hz (version 24V)
90-250 Vac 50 / 60Hz (version 220V).
    Data visualization is done by backlit graphical LCD, which provides quick and intuitive access to the function menu without opening the front cover of the enclosure and maintaining a constant degree of protection (IP67) during setup. Device.
    The housing of the electronic converter is aesthetically pleasing and suitable for any type of installation (vertical/horizontal/45°), painted aluminum, with degree of protection IP67 (IP68 upon request).

PREVIOUS：How is the flowmeter to achieve flow regulatiNEXT：How to do a good job of lightning protection