Industry new

What flowmeter is used to measure the slurry slurry pulp?

The electromagnetic flowmeter measures a class of liquids with high conductivity, such as slurry, coal slurry, mud, pulp, etc. The electromagnetic flowmeter has unique advantages. First of all, the measurement accuracy is high, comparable to the differential pressure flowmeter.
Dry times; secondly, it is completely unnecessary to consider the clogging problem, because the flow sensor with the diameter of the process pipe is used, and the resistance is not increased; as for the abrasion resistance problem, the measuring tube is also installed on the vertical pipe, which is not only uniform in abrasion but also difficult to be Heavy phase deposition occurs at low flow rates.
In order to monitor the wear of the measuring tube lining, in the measuring tube shown, the parts No. 5 and 6 are alarm electrodes, and the wearable sleeve type electromagnetic flowmeter transmitter 1 can be replaced; 2 inner liner; 3 resistant Grinding sleeve; 4 plate; 5 alarm device connector; 6 electrode; 7 ring; 8 electrode end raised the lining wear-through alarm method, in Figure 3.97 when the lining is worn through, the two electrodes are fluid-conducting , thus alerting. From the field operation practice, the wear of the inner lining near the flange of the measuring tube is the most serious, so the protection tube with a strong wear resistance is added.

PREVIOUS：How to measure the flow of gas-liquid two-phaNEXT：High stability machine support parts descript