Industry new

Technical parameters of pneumatic control valve

Technical parameters of pneumatic control valve:
1. Thread: G3/8"-G21/2";
2, valve body material: AISI316;
3, diameter: DN15-DN50;
4. Stem seal: PTFE/FKM-fluororubber;
5, valve core seal: PTFE-Teflon (polytetrafluoroethylene);
6. Actuator material: Die-cast aluminum and stainless steel are optional;
7, the ambient temperature: -10 °C ~ +60 °C;
8, medium temperature: -10 °C ~ +180 °C;
9, suitable medium: water, neutral gas, alcohol, oil, organic solution, water vapor, weak acid or weak alkali solution;
10, installation: can be installed in any location;
11, viscosity: maximum 600mm2/S;
12, control pressure range: 0.3-1Mp;
13, control media: air / neutral gas;
14, fluid working pressure: 0 ~ 1.6MPa.

PREVIOUS：Two-position two-way solenoid valve performanNEXT：Design Features of Two-position Two-way Direc