News

Stainless steel quick connector features, selection methods and precautions for use

In industrial machinery applications, stainless steel joints are indispensable. If the purchasing personnel do not have relevant professional knowledge when using the joints, it may cause differences in the purchase model and application, which will seriously damage the engineering quality.

The correct way to use stainless steel quick connectors:
First, select the type of joint from the type and temperature of the fluid. Fluid types and fluid temperatures have a large impact on the stability and service life of the joints, so the choices are based on these two options. If the stainless steel quick coupling is air, use a steel joint. If the water is water, it can be brass or stainless steel.
Second, select the joint according to the liquid pressure. If the pressure of the fluid is too large beyond the joint receiving range, it is likely to cause the joint to burst and damage. The joint pressure range of different structures is also different, so the joint should be selected according to the pressure.
Third, select connectors according to the external environment. If the humidity of the application environment needs to be rust-proof, the stainless steel joint can be used. If it is corrosive, brass joints can be used. Therefore, the material of the joint should be selected according to the environment (temperature, humidity, corrosion degree, dust, etc.) before use. , sealing and so on.

Fourth, test before installation and use, and then install into the engineering products after being stable.

Advantages of stainless steel quick connectors
1. Efficiency: It can quickly disconnect and connect the joints, which is easy to operate, saves time and effort.
2. Fuel saving: When the oil circuit is broken, the single valve can quickly close the oil circuit, and a drop of oil will not flow out to avoid the loss caused by oil loss.
3. Environmental protection: When the quick connector is installed, the liquid will not leak, no pollution source will be generated, and the environment will be protected.
5. Economy: Affordable, competitive, creating more profits for suppliers and customers.

Stainless steel quick connector use precautions
1. Please do not use it for fluids other than gases and liquids.
2. Control the pressure gauge during use, do not exceed the maximum pressure limit of the joint.
3. Do not exceed the temperature range to prevent the seal material from being worn or leaking.
4. Do not perform vandalism (hitting, bending, stretching).
5. Keep the inside of the joint clean and avoid mixing metal powder or sand dust, causing leaks in the gap.
6. Thread type installation, do not tighten too much during installation, exceed the maximum tightening torque, resulting in joint damage.
7. Do not use hoses with cracks to prevent them from falling out.
8. If used on equipment with vibration shock, check the joint connection status regularly.
9. The fluid used must be filtered to keep it clean and to avoid dust build-up on the joint.
10. Do not disassemble after installation.

PREVIOUS：Material small encyclopedia joint fittings - NEXT：Water Series Rotary Joints - Focus on Microfl