Description of CAMOZZI Pressure Relief Valve for Comex Italy

Provide CAMOZZI pressure relief valve products of Comex Italy

CAMOZZI solenoid valve, CAMOZZI relief valve Italian CAMOZZI products: CAMOZZI cylinder, CAMOZZI magnetic switch, CAMOZZI solenoid valve, CAMOZZI joint, CAMOZZI relief valve. CAMOZZI solenoid valve product parameters: valve position function: two-way, two-way, three-way, normally closed [NC], normally open [NO] working mode: cut-off installation mode: nominal diameter of cartridge: 0.5 mm-0.7 mm Kv (l/min): 0.08-0.15 working pressure: -1_3-7 bar working temperature: 0_50 C medium: filtered compressed air (filtered precision). Grade ISO 8573-13.4.3) or Inert Gas Response Time (ISO 12238): Open < 10 ms, Close < 10 ms Installation Position: Material Valves Contacting with Medium Arbitrarily: Brass, Stainless Steel, Engineering Plastic Seals: Fluororubber Internal Parts: Stainless Steel Electrical Parameter Voltage: 24 V DC-12 V DC-6 V DC (Pressable) Voltage allowance: +10% power consumption: 0.6 W working cycle: 100%, continuous working electrical connection: 2 pins (0.5 x 0.5), 4 mm spacing protection level: IP00. CAMOZZI solenoid valve product models: K8 series, K8B series, K series, KN series, W series, P series, PL series, PN series, PD series, PDV series, A series, 6 series, CFB series. CAMOZZI pressure relief valve product parameters: structural form: piston material: brass valve body, engineering plastic articulated joint, stainless steel spring, NBR (Nitrile Butadiene Rubber) seals interface: G1/8-G1/4 mass: 0.035 kg installation mode: tubular installation, panel installation (arbitrary installation location) working temperature: -5_50 degrees C (medium) The dew point should not be less than 2 C) inlet pressure: 2_10 bar outlet pressure: 0.5_10 bar nominal flow rate: See the relief characteristics of the relief valve flow curve: all relief valves have high relief function CAMOZI relief valve product models: CLR series, M series, T series, PR series.