Introduction of Shanghai product of Kangmaosheng One-way Flow Control Valve

The technical parameters of Kangmaosheng Flow Control Valve are medium temperature: 0-150 C; working temperature: 150 C; working pressure: 1.6 MPa; working pressure difference: 20-600 KPa; flow accuracy: 5%. The working principle of Kangmaosheng Flow Control Valve Digital Flow Control Valve is composed of automatic spool, manual spool and display. The display part is composed of flow valve core, sensor transmitter and electronic calculator display. Its work is extremely complex. The measured water flow passes through the valve, impacts the impeller in the flow core, rotates the impeller and senses the transducer to make the transducer send out a signal proportional to the flow rate. The Kangmaosheng flow signal is sent to the electronic calculator through the wire. After calculator calculation and microprocessor processing, the flow value is displayed. Manual spool is used to regulate the flow, according to the display value to set the required flow value. Automatic spool is used to maintain constant flow, that is, when the pressure of the pipe network changes, the automatic spool will automatically open a large fire and close a small valve to maintain the set flow value unchanged under the action of pressure.

121-810

W000-305-W36

W000-303-W36

W000-405-W36

W000-403-W36

W000-305-W23

W000-303-W23

W000-305-W24

W000-303-W24

W000-405-W23

W000-403-W23

W000-405-W24

W000-403-W24

W000-305-W13

W000-303-W13

W000-405-W13

W000-403-W13

126-800

P000-305-P53

P000-303-P53

P000-405-P53

P000-403-P53

The company's main products are: imported various cylinders, flow control components, solenoid valves, pressure control components, All-gas control valves, power valves, mufflers, detection components, compressed air purification components, vacuum components, pneumatic auxiliary components, sensors and so on. We sincerely welcome new and old customers to visit us.