Analyze the installation process of the solenoid valve

With the continuous development of solenoid valve research and development, our country's solenoid valve industry continues to develop healthily, and the technical content of the developed products is gradually increasing, which is comparable to the performance of some imported solenoid valves. Domestically used solenoid valves are widely used in ancillary equipment. The result is that the imported solenoid valve is expensive, the delivery period is long, and the maintenance is difficult. It has won wide acclaim and is also supported by many consumer companies.
    The steps of the solenoid valve are as follows.
    1. Thoroughly clean the pipe before installing the solenoid valve. The medium to be passed should be free from impurities. Install the filter in front of the valve.
    2. The solenoid valve should ensure normal operation within the fluctuation range of 15[%]-10[%] of the rated voltage.
    3. After the solenoid valve is installed, there must be no reverse pressure difference in the pipeline. It needs to be powered on several times to make it suitable for use.
    4. When installing, please pay attention to the arrow on the valve body should be consistent with the flow direction of the medium. Do not install in places where there is direct dripping or splashing. The solenoid valve should be installed vertically upwards.
    5. When the solenoid valve is faulty or cleaned, a bypass device should be installed to ensure the system continues to operate.
    In order for the solenoid valve to be used continuously and in a healthy manner, regular maintenance and maintenance are highly desirable.