IFM flow switch working principle introduction

The IFM flow switch is mainly used to monitor the water flow in the water system in the water, gas, oil and other medium pipelines. The IFM flow switch triggers the output alarm signal to the unit when the water flow is higher or lower than a certain set point. After the IFM flow switch system acquires the signal, the corresponding indication action can be made. Avoid or reduce the host "dry burning".
The IFM flow switch commands the switching of the system based on the flow. Set the upper or lower limit of the IFM flow switch. When the flow reaches the limit value, the IFM flow switch sends a signal or alarm and the system will run or stop. Generally, systems that require flow will use IFM flow switches. The IFM flow switch is used differently depending on the system and the IFM flow switch model. It depends on the specific situation.
Sharing the working principle of IFM flow switch, SI5010 IFM flow monitor, compressive strength: 300 bar, IO-Link Interface, IP 65 / IP 67, ambient temperature -25...80 °C, M12 connector
  SI5011 IFM Flow Monitor, Compressive Strength: 300 bar, IP 67, Ambient Temperature -25...80 °C, M12 Connector target='_blank'>Connector
  SI5100 IFM flow monitor, compressive strength: 300 bar, IP 67, ambient temperature -25...80 °C, M12 connector
  SI6000 IFM Flow Monitor, IP 67 / IP 69K, Ambient Temperature -25...60 °C, M12 Connector target='_blank'>Connector
  SI6600 IFM Flow Monitor, IP 67 / IP 69K, Ambient Temperature -25...60 °C, M12 Connector target='_blank'>Connector
  SI6700 IFM Flow Monitor, IP 67 / IP 69K, Ambient Temperature -25...60 °C, M12 Connector target='_blank'>Connector
  SI6800 IFM Flow Monitor, IP 67 / IP 69K, Ambient Temperature -25...60 °C, M12 Connector target='_blank'>Connector
SI0556 IFM flow monitor, 2 digital outputs, S1: Flow and temperature monitoring S2: Temperature monitoring, IP 67, Ambient temperature -25...80 °C, M12 connector
  SI0557 IFM flow monitor, 2 digital outputs, IP 67, ambient temperature -25...80 °C, M12 connector
  SI1106 IFM flow monitor, 1 relay output, IP 67, ambient temperature -25...80 °C, 1/2" UNF connector
  SI5000 IFM Flow Monitor, IP 67, Ambient Temperature -25...80 °C, M12 Connector target='_blank'>Connector
  SI5001 IFM Flow Monitor, IP 67, Ambient Temperature -25...80 °C, M12 Connector target='_blank'>Connector
  SI5002 IFM flow monitor, 2 digital outputs, IO-Link Interface, IP 65 / IP 67, ambient temperature -25...80 °C, M12 connector
  SI5003 IFM flow monitor, 2 digital outputs, IP 67, ambient temperature -25...80 °C, M12 connector
  SI5004 IFM flow sensor unit, analog output, IP 67, ambient temperature -25...80 °C, M12 connector
  SI5006 IFM flow monitor, 1 relay output, IP 67, ambient temperature -25...80 °C, 1/2" UNF connector
  SI5007 IFM flow monitor, 2 digital outputs, OUT1: Flow monitoring OUT2: Temperature monitoring, IO-Link Interface, IP 65 / IP 67, Ambient temperature -25...80 °C, M12 connector
  SI500A IFM Flow Monitor, ATEX Explosion-Proof Product License, Group II, Type 3D/3G, IP 67, Ambient Temperature -20...60 °C, M12 Connector target='_blank'>Connector