Low-power solenoid valve--Solenoid valve, solenoid valve factory introduction

Low-power solenoid valve for general purpose or safety valves in pneumatic and hydraulic systems, using different sealing structures and sealing materials; suitable for a wide range of fluid media; eg hot air, hot water, refrigerants and other flammable Explosive fluid.

Benefits of using a low power solenoid valve

Low-power solenoid valves play an increasingly important role in the improvement of solenoid valves, and are increasingly popular among users. What are the advantages of low power solenoid valves?

1) High reliability. The optimized magnetic circuit greatly reduces power consumption, and the large (1.6mm) pilot hole not only reduces clogging but also speeds up response time.

2) The operating pressure range is 0 to 1 MPa.

3) It can be operated directly by PLC and low-power output process system. The valve has a low surface temperature and a high temperature rating, making it ideal for use in explosive environments, but only for gaseous media.

4) Reduce the number of DC 24V regulated power supply devices. Compared to conventional solenoid valves, low-power solenoid valves reduce power consumption and reduce heat generated during operation when powered by a backup battery.

5) Solved the problem of large line voltage drop of 24V solenoid valve. The line voltage drop of high power and low power solenoid valves has significant advantages.

Therefore, although the price of the low-power solenoid valve has increased, the cost of connecting the wires and the power supply equipment is reduced, thereby reducing the maintenance and repair costs, and also saving the cable cost, which can be directly driven by the DCS or SIS input and output card. . In addition to affecting the line spacing, the power consumption of the low-power solenoid valve is lower, and the coil temperature rise is smaller.

Example:

583 Series Model 583AA19PG Low Power Type

Three normally closed valves (straight row)

The 583 Series ultra low power solenoid valves easily connect boards and micro components. Versatility is an electrical signal used to connect a pneumatic output. A smaller solenoid valve (#10-32 port) or multiple valves are fitted with a special solenoid valve on one side. Air and other common gases – it is recommended to filter 30 microns or less.

1, can use the "pilot" larger valve.

2, the most ideal choice for microelectronic equipment.

3. Medical and chemical analysis equipment is widely used.

4, can be directly controlled by the controller.

5, high-quality craft production.

Use environment:

1, medium: air and other common gases (recommended filter 30 microns), must be specified when ordering.

2. Solenoid valve operating temperature: standard common temperature range – 0°F (-5°C) to 104°F (50°C), pay attention not

To apply a plastic valve body at the freezing point;

3, the valve limit pressure: 1500? PSI;

4. Reaction action time: 5 microseconds.

5, leakage level: foam standard (American standard).

Electrical characteristics:

1. Valve supply voltage: AC: 14 – 220V AC 60 HZ, 13 – 202 VAC 50HZ; DC: 3 – 150 V DC;

2. Rated power: AC: 3.5W; DC: 3.5 W;

3, coil construction: wiring: lead wire (standard), miniature DIN (optional);

4? Flow rate: up to 1000 CPM;

5, response time: exchange: 3-9 milliseconds, DC: 9 milliseconds;

6, duty cycle: continuous.

Mechanical characteristics:

1. Body material: polyester plastic (standard); 2. Internal components: round brass or stainless steel;

3, sealing material: nitrile rubber (nitrile rubber) (standard). Other material;

4, hole diameter: (refer to the above table for the specific model);

5, the service life: ≥ 5 million times, depending on the application, maintenance, etc.;

6, unit product weight: 0.1KG;

7, product size: 21.0 × 34.0mm.

---------------------------------

584 series model 584AA19PG low power type three normally open valve

The 584 Series ultra low power solenoid valves easily connect boards and micro components. Versatility is an electrical signal used to connect a pneumatic output. A smaller solenoid valve (#10-32 port) or multiple valves are fitted with a special solenoid valve on one side. Air and other common gases – it is recommended to filter 30 microns or less.

1, can use the "pilot" larger valve.

2, the most ideal choice for microelectronic equipment.

3. Medical and chemical analysis equipment is widely used.

4, can be directly controlled by the controller.

5, high-quality craft production.

Use environment:

1, medium: air and other common gases (recommended filter 30 microns), must be specified when ordering.

2. Solenoid valve operating temperature: standard common temperature range –0°F (-5°C) to 104°F (50°C), note

It is not intended to apply a plastic valve body at the freezing point;

3, the valve limit pressure: 1500? PSI;

4. Reaction action time: 5 microseconds.

5, leakage level: foam standard (American standard).

Electrical characteristics:

1. Valve supply voltage: AC: 14–220V AC 60 HZ, 13–202 VAC 50HZ; DC: 3-150

V DC;

2. Rated power: AC: 3.5W; DC: 3.5 W;

3, coil construction: wiring: lead wire (standard), miniature DIN (optional);

4, flow rate: up to 1000 CPM;

5, response time: exchange: 3-9 milliseconds, DC: 9 milliseconds;

6, duty cycle: continuous.

Mechanical characteristics:

1. Body material: polyester plastic (standard);

2, internal components: round brass or stainless steel;

3, sealing material: nitrile rubber (nitrile rubber) (standard). Other material;

4, hole diameter: (refer to the above table for the specific model);

5, the service life: ≥ 5 million times, depending on the application, maintenance, etc.;

6, unit product weight: 0.1KG;

7, product size: 21.0 × 34.0mm.