Flange connection series two-way two-way zero differential (normally open) solenoid valve introduction

Body material: cast brass, stainless steel, cast iron Interface: flanged connection
Working pressure: 0~6bar Flow path: φ16～50mm
Two-position two-way direct-acting (normally open) diaphragm solenoid valve with flange connection. The solenoid valve is energized and closed, and the power is turned off. Zero differential pressure starts. Widely used for automatic control of pipeline fluids.
Body material: forged brass, stainless steel SS304 cast iron
Ambient temperature: -10 to 65 ° C
Sealing material: nitrile rubber NBR (-5 ~ 80 ° C)
Optional EPDM EPDM (medium temperature -10～130°C); fluororubber VITON (medium temperature -10～120°C)
Working voltage: AC220V/110V 50/60Hz DC24V DC12 Other voltage can be customized
Voltage fluctuation: AC220V/110V -15%~+10% 36V or less is allowed to fluctuate ±10%
Coil parameters: Waterproof grade: plastic coil IP65 iron shell coil IP54 insulation grade: plastic coiled coil H grade iron shell coil grade B
Optional time timing controller LED indicator (only for plastic coiled DIN43650A junction box configuration) ES low power coil (medium temperature must be within 80 °C)