How to pre-send the solenoid valve coil overheating

If the solenoid valve coil is in a state of high temperature for a long time, it is quite unfavorable for the equipment, it will burn out, and if it is serious, it will cause a safety accident. For this, people need to pay more attention to actively prevent and prevent accidents.

The solenoid valve coil is in the case of overheating. It is very likely that the switch of the protection circuit is not opened in time, and the return of the entire solenoid valve coil is not automatically lost after receiving the action. If the whole time is The continuous time process will have a bad influence, and encountering such a situation requires timely resolution.

1. In order to avoid the overheating of the solenoid valve coil, the multi-hydraulic check valve is required for maintenance, and the inner wall is re-ground. It should also be replaced in time for the aging part, so as to ensure the sensitivity of its work.

2. The electromagnetic starting valve needs to be modified. The main method is to take out the internal spring, so that the gravity of the valve core can be used to provide gravity, which not only effectively reduces the water pressure of the solenoid valve coil, but also enables Extend the life of the seal components.

For the overheating phenomenon of the solenoid valve coil, people must actively avoid it, otherwise it will cause serious consequences.