Stainless steel globe valve introduction

The stem axis of the stainless steel shut-off valve is perpendicular to the seat sealing surface. The valve stem has a relatively short opening or closing stroke and a very reliable shut-off action, making this valve ideal for use as a medium for cutting or regulating and throttling.
       Once the valve flap of the shut-off valve is in the open state, its valve seat and the valve sealing surface are no longer in contact with each other, and it has a very reliable cutting action. This valve is very suitable as the cutting or adjusting and section of the medium. Stream usage. This type of valve should generally be installed horizontally in the pipeline.
       Once the shut-off valve is open, there is no contact between its seat and the disc sealing surface, so its sealing surface is less mechanically worn, because the valve seat and disc of most shut-off valves are easier to repair or replace. It is not necessary to remove the entire valve from the pipeline when sealing the components, which is very suitable for the case where the valve and the pipeline are welded together. The flow direction of the medium as it passes through such a valve changes, so the flow resistance of the shut-off valve is higher than other valves.