Description of the application range of the material level switch

There are many types of material level switches, such as resistance rotary level switch, RF admittance level switch, diaphragm type level switch, tuning fork type level switch, vibrating rod type level switch, each of which has its own advantages. Suitable for different working conditions.
1. Rotary rotary level switch

The rotary-type level switch can be used for the measurement of solid particles and dust. It is mainly used in feed, silica, stone, spherical particles, wood chips, calcium powder, rubber, metal, limestone, grain, foundry sand, saw. Measurement of materials such as chips, pulverized coal, resin, raw cowhide, peanuts, clay, etc.

2, RF admittance level switch

RF admittance level switch products are widely used, several typical occasions are as follows: chemicals, plastics, film, feed, grain rubber drugs, liquid waste water sand, food mud cement, powder coating / clothing coal, granular solid oil pulp Measurement of materials.

3, diaphragm type level switch

Diaphragm level switches can be installed outside the vessel for installation, repair, equipment replacement or sensitivity adjustment. In practical applications, it is not recommended to use in environments where the material is extremely light, sticky or large.

4, tuning fork type level switch

Tuning fork level switch Dual-purpose level switch with intelligent circuit for almost all liquid light, easy to flow solids

5, vibrating bar type level switch

The vibrating bar level switch can be used for the monitoring of powder, grain or bulk material (with a diameter not exceeding 5-10CM). The material density must be greater than 0.05KG/DM3. If it is lower than this density, the internal friction of the material will not be enough to weaken the amplitude of the vibration switch. This vibration level switch can be widely used in coal, cement, limestone, grain, sugar, Monitoring of materials such as fly powder.