Acting German AVENTICS Anwarchi pressure reducing valve features

German AVENTICS Anwarchi pressure reducing valve features
The Avw Group is a group of companies that supply the world's *pneumatic components and automation systems worldwide. At the same time, the company is a professional supplier of transmission and control solutions for the marine industry, oilfield equipment and commercial vehicles. The company's predecessor was the pneumatic business unit of Bosch Rexroth, which now operates independently globally.
German AVENTICS Anwarchi pressure reducing valve features
1. Pressure reducing regulator
Main features: 1. Piston type above DN65. For the diaphragm to improve the life of more than 3 times; 2, DN50 or less, with a nylon reinforced rubber flat diaphragm instead of the original diaphragm, also increased the life of more than 3 times. Applicable medium: water, air. Medium temperature: 0~90 °C.
2, bellows pressure reducing valve
This valve is used on steam, air and other non-corrosive gas pipelines with a temperature below 180C. It is adjusted to reduce the pressure of the medium passing through the valve to a required outlet pressure and keep the outlet pressure of the medium relatively stable. However, the difference between the inlet pressure and the outlet pressure must be greater than or equal to 0.5 bar.
3, steam pressure reducing valve
The steam pressure reducing valve is suitable for use on steam lines. Through the adjustment of the pressure reducing valve, the inlet pressure can be reduced to a certain required outlet pressure. When the inlet pressure or flow rate changes, the pressure reducing valve can automatically keep the outlet pressure fluctuating within a small range by the energy of the medium itself.
4, proportional pressure reducing valve
The proportional pressure reducing valve has beautiful appearance, reliable quality, accurate proportion and stable operation, which not only reduces the dynamic pressure but also reduces the static pressure. The valve uses the pressure difference generated by different load-bearing areas at both ends of the piston inside the valve body to change the pressure behind the valve to achieve the purpose of decompression.
5, piston type adjustable pressure reducing regulator
The piston type adjustable pressure reducing regulator valve is installed on the pipeline of the high-rise building water supply and drainage system. By utilizing the characteristics of the body, the suspended particles with larger specific gravity and larger diameter will not enter the control system, ensuring that the system circulation is unobstructed and the valve is made. It can operate safely and reliably. The system operates smoothly, with high strength and long service life. Piston type is used for valves larger than 450 caliber.