Acting sales of Italian camozzi rodless cylinder
Italian camozzi rodless cylinder
Kang Maosheng
CAMOZZI Rodless Cylinder 43N-PSB-50-100 Product Description: The piston of the cylinder is equipped with a permanent magnet. By installing a magnetic proximity switch, the position signal of the piston can be obtained. An adjustable air cushioning device and a mechanical cushion are mounted on the front and rear end caps to reduce the noise generated when the piston reaches the end of the stroke.
Italian camozzi rodless cylinder
The two end caps of the cylinder are provided with adjustable air buffering devices, and each end cap has four inlet and outlet ports of the same size,
Depending on the application, any one of the inlet and outlet ports can be selected, and the remaining inlet and outlet ports must be blocked with the corresponding pipe joints.
It is recommended that rodless cylinders should be used in a clean, dust-free environment.
Note: 1. Installation accessories, magnetic proximity switches and pipe joints that plug in (out) ports must be ordered separately.
2. Magnetic proximity switch see page 1/9.05.01
The 50 series rodless cylinders are available in seven sizes from 16 to 80 mm.
The rodless cylinder saves about 40% of the installation space compared to the rod cylinder. It is often used to install the cylinder in a compact or concealed space.
A permanent magnet is mounted on the piston, and a position signal of the piston can be obtained by installing a magnetic proximity switch.