Acting Italian OMAL Omar pneumatic actuator performance and characteristics

Performance and characteristics of Italy OMAL Omar pneumatic actuator
OMAL.SPA has a wealth of experience and has become a competitive product. For more than 30 years, we have been committed to providing the right valves and actuators for our customers through our superb technical skills and considerate service. Excellent quality represents the excellent performance of the product. In order to ensure the safety of Zui, Omar is designed to meet the requirements of higher standards and provide customers with reliable and innovative products.
Performance and characteristics of Italy OMAL Omar pneumatic actuator
Omar actuator DA series double acting aluminum technical parameters
Torque: from 8Nm to 8000Nm.
Flange connection standard: UNI EN ISO 5211.
F03 - F04 - F05 - F07 - F10 - F12 - F14 - F16 - F25.
Meets the UNI EN 15714-3:2009 standard.
Auxiliary device connection: NAMUR connection.
Rotation angle: 90°.
Torque: Directly proportional to the control air pressure; refer to the attached table.
The number after each actuator DA number corresponds to the valve starting torque at 5.6 bar pressure.
Explosion-proof (ATEX) complies with EU 2014/34/EU standards. Explosion-proof (ATEX) product number must be preceded by a YX letter
Omar actuator operating conditions
Temperature: from 0 ° C to +80 ° C; from -20 ° C to +80 ° C under dry air. (Special models: high temperature: from -20 ° C to +150 ° C; low temperature: from -50 ° C to +60 ° C)
Air source pressure: 5.6 bar; Zui large working pressure: 8.4 bar.
Air supply: filtered and dried compressed air without wetting.
In the case of moisture, use oils that do not contain detergent, or suitable for fluororubber