Acting AVENTICS Anwochi MINI cylinder Anwarchi spot

AVENTICS Anwarchi MINI cylinder Anwarchi spot
The MINI cylinder pressure dew point must be at least 15 °C below ambient and medium temperatures, and the allowable zui high temperature is 3 °C.
The oil content of the compressed air of the Anwarchi cylinder must remain constant throughout its service life.
Use only oils approved by AVENTICS, the necessary fastening parts for the magnetic sensor.
It is well known that compared to electric actuators, the cylinders can work reliably under harsh conditions and are simple to operate, and are basically maintenance-free. The cylinder is good at reciprocating linear motion, and is especially suitable for the transfer requirements of industrial Zui--the straight-line handling of workpieces. Moreover, simply adjusting the one-way throttle valve mounted on both sides of the cylinder can easily achieve stable speed control, and also becomes a large feature and advantage of the cylinder drive system. Therefore, for users who do not have multiple positioning requirements, the majority prefer to use cylinders from the perspective of ease of use. At present, most of the applications of electric actuators in industrial fields require high-precision multi-point positioning, which is difficult to achieve with cylinders, and the second best result.
AVENTICS Anwarchi MINI cylinder Anwarchi spot
Electric actuators are mainly used for rotating and swinging conditions. The advantage is that the response time is fast and the speed, position and torque are precisely controlled by the feedback system. However, when it is necessary to complete the linear motion, the transmission needs to be converted by mechanical means such as a toothed belt or a screw rod, so the structure is relatively complicated, and the professional knowledge of the working environment and the operation and maintenance personnel are highly demanded.
AVENTICS Anvochi MINI cylinder
The internal and external leakage of the cylinder is generally caused by the eccentricity of the piston rod installation, insufficient supply of lubricating oil, wear or damage of the sealing ring and the sealing ring, and impurities in the cylinder and scratches on the piston rod. Therefore, when the cylinder leaks inside and outside, the center of the piston rod should be re-adjusted to ensure the coaxiality between the piston rod and the cylinder; it is necessary to check whether the oil mister is working reliably to ensure that the actuator is well lubricated; When the ring and seal ring appear worn or damaged, they must be replaced in time; if there is impurity in the cylinder, it should be removed in time; if there is a flaw on the piston rod, it should be replaced. Anwochi AVENTICS mini cylinder model recommended
The output force of the cylinder is insufficient and the operation is not stable. Generally, the piston or the piston rod is stuck, the lubrication is poor, the air supply is insufficient, or there is condensation water and impurities in the cylinder. In this regard, the center of the piston rod should be adjusted; check whether the operation of the oil mister is reliable; whether the air supply line is blocked. When there is condensed water and impurities in the cylinder, it should be removed in time.
The buffering effect of the cylinder is poor, which is generally caused by the wear of the buffer seal or the damage of the adjusting screw. In this case, replace the seal and adjustment screw.
Damage to the piston rod and cylinder head of the cylinder is generally caused by the eccentricity of the piston rod installation or the ineffective damping mechanism. In this case, adjust the center position of the piston rod; replace the cushion seal or adjustment screw.