Industry new

How to properly maintain the electromagnetic flowmeter

In industrial production, the use, production and discharge of liquids are appropriate, but the control of the flow of liquids is very necessary. Electromagnetic flowmeters have these characteristics. The electromagnetic flow is used to measure the company's liquid flow, but Any equipment needs normal protection, and it is also necessary for the installation and inspection of electromagnetic flowmeters and future maintenance.

In the maintenance of electromagnetic flowmeters, we must first pay attention to the appearance of the view, to see if the appearance is damaged, the integrity of the appearance is the primary of the electromagnetic flowmeter, and secondly, the accuracy of the electromagnetic flowmeter is also the most important to see the electromagnetic The zero point of the flow meter, pay attention to the calibration work of the zero point to be carried out frequently to ensure the accuracy of the electromagnetic flowmeter.
The flow sensor and converter of the electromagnetic flowmeter use other signals to check the accuracy of the electromagnetic flowmeter. Together with the electromagnetic action, the change of the magnetic field and the current in the converter is checked, and the viewing of the coil in the converter is also necessary. It is necessary to timely arrange the dirt on these equipments, and timely sort out the contaminants of these connotations, to ensure that its various components can be touched very well when used, the sensitivity of the sensor and the transformation of the converter will be very good.
When you look at the appearance, pay attention to the cable. The cable must be completely transmitted. The cable should be used to transmit various signals. Pay attention to the integrity and stability of the connector. Also pay attention to the entry of the surface impurities of the cable. For packaging protection, especially regarding the locality of the interface, it is necessary to investigate the degree of loss of the cable in a timely manner. Regarding the types of different types of cables between different parts, it is necessary to avoid the unnecessary troubles caused by misconnection.
The various components of the electromagnetic flowmeter are very weak, and the slight discomfort will result in instability and inaccuracy in the measurement of the medium flow. Therefore, the key orientation, the sensor and the converter of the electromagnetic flowmeter are identified. Make corresponding adjustments, adjust its accuracy in a timely manner, and carry out reasonable calibration operations, so as to ensure that the flow of liquid medium in the company's production is more accurately reflected in the process of future use, so that the company can control the flow or reduce the cost. The aspect is satisfactory.

PREVIOUS：What aspects should be noted in the use of elNEXT：Analysis of the introduction of intelligent e