brand information

Norgren oil mister new product - L49C oil mister introduction

Caliber: 1/8 ... 1/2" (ISO G)
Pre-set product options for easy selection of flexible product configurations

Technical Parameters
Medium: compressed air
Maximum inlet pressure: 10 bar (145 psi)
Flow rate: The outlet set pressure is 6.3 bar. Under the pressure drop of 1 bar, the maximum flow rate of the 1/2’’ diameter filter is 116.7 l/s.
Caliber: G1/8, G1/4, G3/8, G1/2
Filter bowl volume:
G1/8 & G1/4: 20 ml
G3/8 & G1/2: 85 ml
Start point *1):
1/8” & 1/4”: 0.25 l/s
3/8”, 1/2”: 0.5 l/s
*1) Minimum flow rate of the oil mister under 5 bar pressure
Drainage method: bottom seal
Environment/Medium Temperature: 0 ... +60°C (+32 ... +140°F) When the temperature is below +2 degrees Celsius, the gas should be dry to prevent freezing.
Component material:
G1/8 & G1/4 body: nylon
G3/8 & G1/2 body: die-cast aluminum
Filter bowl: transparent plastic
Filter cup cover: nylon
Seal: Ding Qing Rubber

PREVIOUS：IMI Norgren 49 Series BL49 - Filter Reducing NEXT：Description of the structure difference of NO