Industry new

Electromagnetic flowmeter installation structure and caliber and electrode selection introduction

Electromagnetic flowmeter installation structure and diameter and electrode selection

Mounting structure
The electromagnetic flowmeter main body and the sensor are assembled together to form an integrated plug-in electromagnetic flowmeter; or connected to the flow sensor through a signal cable to form a split type electromagnetic flowmeter. The split converter is mounted on a wall or bracket.

Caliber selection
When the usual flow rate of the measuring pipe exceeds 0.5 m/s, select the flow meter of the same diameter as the measuring pipe.
The flowmeter with a diameter smaller than the measuring pipe is selected in the following cases: the flow rate in the measuring pipe is slow, and the measuring requirement of the flowmeter cannot be met or the measuring accuracy cannot be satisfied at the flow rate (to obtain a relatively high precision, the lower limit of the flow rate should be greater than 1 m) /s).

Electrode material selection
1. Stainless steel 316L: used for weak corrosive medium and neutral solution such as industrial water, domestic water, sewage, etc. and weak acid such as carbonic acid and acetic acid.
2. Titanium: Corrosion resistance to seawater, various chlorides and hypochlorites and multiple hydroxides.
3. Hastelloy C: an oxidation resistant acid such as nitric acid, mixed acid, a mixture of chromic acid and sulfuric acid. Also corrosive to the environment of oxidizing salts or other oxidants. Good corrosion resistance to seawater, alkali solution, and oxide solution.
4. Hastelloy B: has good corrosion resistance to non-oxidizing acids and alkali salts such as sulfuric acid, phosphoric acid and hydrofluoric acid.
5. 钽: In addition to hydrofluoric acid, it is almost resistant to corrosion by all chemical media. Because of its high price, it is only used for hydrochloric acid and concentrated sulfuric acid.
6. Tungsten Carbide: It has excellent wear resistance and is designed for wear media such as mud and pulp.

PREVIOUS：Electromagnetic flowmeter output shaking checNEXT：Electromagnetic flowmeter sensing signal weak