100430 festo order number SFL-100-S transmitter nozzle - Festo selection

The gas barrier includes an emitter nozzle and a receiver nozzle. The gas barrier can be used as a contactless signal generator with a pitch of mm for detecting an object with an indeterminate position or to a nozzle, if the nozzle and the nozzle are The output signal of the airflow between the two ports depends not only on the pressure of the port, the position sensing distance, but also on the shape of the object to be scanned.
100430 festo order number SFL-100-S transmitter nozzle Festo.png
The origin of the transmitter and receiver gas are all transmitted through the port 1? 2 bar ¡ This will eliminate the effect of contaminants on the receiving nozzle and ensure that 2 maintains a good 0 signal (partial vacuum. The airflow from the firing nozzle prevents the receiving air
This will result in a back pressure that causes the pilot pressure of the receiving nozzle 32 to be greater than 0.5 b. This can be achieved by using the amplifier pressure signal.
If an object blocks the transmitter to the receiver's port, it will produce a continuous 0 signal derivative.
Launch nozzle SML-40-S receiving nozzle S3 launch nozzle SFL-100-S receiving nozzle SFL-100
- Reliable performance, even in heavily polluted situations
- Normal operation when the ambient temperature is high
- Can be used in an explosive environment
- Insensitive to acoustic and magnetic field disturbances
- Reliable use in all black environments, scanning transparent for SML-40-S, SD-3 flange mounting
- FBN-8/10-1 tripod mounting
- HBN-8/10-1 for SFL-100-S, SFL-100-F tripod mounting
- HBN-20/25-1 flange mounting
- FBN-20/25