Industry new

Application of mud valve in waterworks

Discharge valve product brief:
The mud discharge valve is an angular truncation type valve that is operated by a hydraulic source or a pneumatic source. Usually installed in rows on the outer side wall of the bottom of the sedimentation tank to remove muddy sand and dirt deposited at the bottom of the tank. The mud valve has good sealing performance and is durable. The valve sealing pair is also rubber sealed and has no leakage. Remote control is also possible through the electric 2/2-way reversing solenoid valve. Easy to operate, safe and reliable. This product is used in various types of water pools of water companies or other companies. It is installed outside the pool to remove sediment from the pool.
Drain valve physical map
Drain valve product features:
The main feature of the pneumatic mud valve is to replace the piston type with a double-chamber diaphragm transmission mechanism, no motion wear and long service life. The main purpose is to install it outside the bottom outer wall of various types of sedimentation tanks to remove sediment and dirt from the bottom of the pool.
1. The mud valve adopts the double chamber diaphragm conveyor instead of the piston valve; there is no movement and wear, no water leakage due to impurities, no sensitivity to sedimentation, no lubrication, no mechanical grinding.
2. Pneumatic mud discharge valve has good sealing performance, and adopts rubber-lined valve plate. The valve seat adopts a slope opening and is not easy to deposit sediment impurities.
3. The driving medium pressure is low, no need for another high pressure pump or air compressor, and the manual reversing valve or electromagnetic four-way reversing valve is used for centralized control, and the control operation is convenient.
4. Durable and long service life.
Drain valve debugging steps:
1. Check that the pneumatic drain valve control tube is installed in the same way as in the manual. 2. Check whether the technical parameters of the solenoid valve meet the requirements, the power is turned on, and the power is turned off. 3. Check each bolt and pipe fitting to make the joint strong and reliable.
4. Pass the medium to the control line.
5. The main valve of the mud discharge water, keep the medium of the control pipeline, the main valve of the solenoid valve is energized, and the main valve of the solenoid valve is closed.
Application of mud valve in waterworks
Applications:
The mud discharge valve has a valve body, an upper and lower diaphragm chamber, a diaphragm and a valve stem. The upper and lower diaphragm chambers act as liquid tools, the liquid gas acts as a power, and the diaphragm and valve stem act as switches. It takes only 20 seconds to open the valve plate. This valve must be a manual reversing valve or solenoid valve to remotely control the mud valve switch. The valve has strong sealing, good switching performance, convenient maintenance, and the service life can reach more than five years, and the shelf life is 18 months. The applicable medium for the mud discharge valve is raw sewage, and the temperature of the medium should generally be less than 50 ° C, which is used as a sludge and wastewater in the discharge water tank. The mud valve is of angular structure and the inner nylon reinforced rubber diaphragm is used for long-term use of mud valve.

PREVIOUS：Steam trap selection and performance comparisNEXT：Various valve working principles and valve ad