Turbidity meter SELI online turbidity meter parameter introduction

Basic characteristics of the turbidity meter (SELI):

Simple parameter settings
Measurement results are not affected by color
Highlight display, probe can be CIP/SIP
Reliable phase separation
Hygienic design, cone-free sealing system without seals
Integrated digital / analog output
Product status detection
Process monitoring and documentability
Filter monitoring
Save more sewage charges
LED-light source for more stable and long-lasting performance guarantee
Integrated design, high integration circuit and parameter display
Turbidity meter (SELI) technical characteristics:

Measuring range 0-100%
Measuring source wavelength 880 nm
Measuring light source: LED
Optical path length 5, 10 mm and 20 mm
High grade stainless steel material 1.4435 (316L)
Surface finish <0,37 μm Ra
Display window: backlight
Power supply voltage 12...30VDC
Signal output 4...20mA
PNP switch output Normally open / normally closed, up to 200mA
Input connection: zero position
Outlet type M12-plug, 5 pins
Process connection type 1/2" thread, cone seal without seal
Ambient temperature: -20...70°C
Process temperature: 0...90 oC, 140 oC, maximum 2 hours (SIP)
Process pressure up to 10 bar (150 psig) at 60 oC

Typical applications:

A turbidity meter is a sensor that measures the optical density of a fluid and is used for continuous process control of the product or to indicate its change. Especially suitable for phase separation, filtration control and concentration measurement of a variety of products.