When installing the thin ball valve, ensure that the installation position pipeline is in the coaxial position.

The maintenance method of the electric thin ball valve, the electric thin ball valve is to connect the ball valve between the two pipe flanges by the stud bolt, the two flanges are welded on the pipe, and the two flanges sandwich a ball valve, which is a thin ball valve. Mainly when the space is narrow, or when the pipe is short, it is more suitable. When installing the electric thin ball valve, ensure that the installation position pipeline is in the coaxial position. The two flanges on the pipeline should be kept parallel, confirming that the pipeline can withstand the weight of the ball valve. If the pipeline can not bear the weight of the ball valve, it is the pipeline before installation. Equipped with corresponding support. Check if there are any impurities, welding slag, etc. in the pipeline, and the pipeline must be purged.
German standard cast steel flange gate valve
Thin ball valve features:
(1) The fluid resistance is small, and the full-diameter ball valve has substantially no flow resistance.
(2) Simple structure, small size and light weight.
(3) Close and reliable. It has two sealing faces, and the sealing surface material of the ball valve is widely used in various plastics, and has good sealing performance and can achieve complete sealing. It has also been widely used in vacuum systems.
(4) It is easy to operate, and it can be opened and closed quickly. It can be rotated by 90° from full opening to full closing, which is convenient for long-distance control.