brand information

10187 festo order number PRS-1/4-4 connection block - Festool sales

Through the filter muffler, all air discharged from the pneumatic control system is purified to reduce exhaust noise. The condensate is collected through a low plastic bowl cover and discharged through a drain.
- Flow rate: 6000 l/min.
- Size: G1/2 and G1
Characteristics
- The cleanliness of the exhaust air is 99.99%, almost free of any oil and impurities.
- Regardless of the frequency, the muffler can effectively reduce exhaust noise.

Many of Festo's drives have sensor mounting slots (position sensing for sensor mounting) and mounting slots on profiles. Closing the groove by the groove cover allows the driver surface to look smoother.
Sensor slot cover (protects the sensor cable to prevent debris from entering the slot)
- ABP-5-S (for 8 mm sensor slot) grooved cover to prevent debris from entering the mounting slot
- ABP-5 (this groove is suitable for groove nut NST-5-M5)
- ABP-8 (this groove is suitable for groove nut NST-8-M6)
Delivery length 500 mm

Direct acting valve series, manual and mechanical drive valves.
- Flow rate: 140 l/min
Two-position three-way valve
- Normally closed or normally open, depending on port selection
- Connection size: G1/8
- 2 drive connections for direct-acting round head valves: roller lever valve, one-way roller lever valve
- 2 drive connectors for rotary lever valves: Rotating lever with long or short rollers, rotary lever
- Rotary lever valve with anti-corrosion and acid resistant design
Rotary lever valves are mechanically driven to achieve different drive ranges by repositioning two components in the control drive.
- Mounting bracket HV-1/8 Scope of supply: 1 mounting bracket, 2 M5x25 screws, to DIN 912, 2 hex nuts and spring washers
10187 festo order number PRS-14-4 connection block - Festo.png

PREVIOUS：10188 festo order number PRS-1/4-5 connectionNEXT：10186 festo order number PRS-1/4-3 connection