Product name: Imported gas solenoid valve Product model: Buhrer
Drive method: electromagnetic connection: flange, thread
Structure: Pilot type Seal structure: Soft seal, Hard seal
Pressure range: 1.6-100MPa Nominal diameter: DN15-500
Common materials: WCB, 304, 316, alloy steel, etc.
Product introduction
The imported gas solenoid valve produced by Breer, the driving method can be electromagnetic, the connection method can be flange, thread, the structure can be pilot type, the sealing structure can be soft seal, hard seal, pressure range PN1.6-100MPa, nominal The diameter is DN15-500mm, and the materials can be WCB, 304, 316, alloy steel, etc. Because the valve is used in a very wide range, the same valve has different combinations in different situations and working conditions.
Product Details
Imported gas solenoid valve-Buhrer brandIt is widely used in industrial or kiln, boiler, gas pipe network, gas processing plant, gas station, gas leakage alarm system, safety protection system, fire alarm system and other cities or factories flammable and explosive media Cut off; when the hidden danger of the accident is found, cut off quickly to stop the vicious accident in time.

Features of imported gas solenoid valve:
Stainless steel valve core, when the valve is not activated for a long time, the valve is activated quickly and quickly cuts off; the coil is energized for a long time, the heat is low, it will not burn out, the power consumption is low, and the energy is saved; zero pressure start, zero leakage.

A series of imported solenoid valves of the American Buhrer brand: direct-acting solenoid valves, step-wise direct-acting solenoid valves, medium-low pressure solenoid valves, high-pressure solenoid valves, ultra-high-pressure solenoid valves, ultra-high temperature solenoid valves, steam solenoid valves, low-temperature solenoid valves, Anti-corrosion solenoid valve, diving solenoid valve, gas solenoid valve, gas fast shut-off solenoid valve, gas safety solenoid valve, vacuum solenoid valve, pulse solenoid valve, self-protection solenoid valve, two-position three-way solenoid valve, solenoid valve with manual function , Solenoid valve with signal function, etc.

Main technical parameters of imported gas solenoid valve:
Product specifications: DN15 ～ DN500
Body material: cast steel, stainless steel, etc.
Applicable medium: gas, natural gas, liquefied gas, biogas, methane, gas and other gases or fuel oil
Temperature range: -20 ～ 100 ℃
Medium viscosity: less than 50C St
Protection performance: waterproof, explosion-proof (Exd IICT5), anti-corrosion
Wiring method: terminal block type; lead type; plug type
Control method: normally open, normally closed
Power supply voltage: DC12 ～ 127V; AC36 ～ 380V
Connection method: internal thread, flange, external thread
Leakage: Zero
Imported gas solenoid valve working principle: normally closed: when the coil is energized, the pilot valve core is pulled in, the pilot hole is opened, the valve upper chamber is depressurized, the piston is pushed by the pressure of the lower chamber medium, and the solenoid valve is opened; The valve core is reset by the spring, the pilot hole is closed, the valve cavity is pressurized by the piston throttle hole and the thrust of the return spring is closed, and the solenoid valve is closed. Normally open: When the coil is energized, the pilot hole is closed, the upper cavity of the valve is pressurized by the piston orifice and the thrust of the return spring, and the solenoid valve is closed. When the coil is de-energized, the pilot valve core is reset by the spring, the pilot hole is opened, the upper cavity of the valve is depressurized, the piston is pushed by the pressure of the lower cavity medium, and the solenoid valve is opened.

Order process
Landline: 021-59718851 (AM-8: 30 to PM-17: 30)
Mobile phone: 18918462396 (WeChat same number 24-hour service)

QQ: 2030185432

Email: kunage@126.com
Receive customer purchase list, provide customers with valve model selection and quotation (price list).
Specific agreement: delivery time, special requirements, etc.
download Google:
Customers have special requirements for products, and must provide the following instructions in the order contract:
(1) Structure length;
(2) Connection form;
(3) Nominal diameter, full diameter, reduced diameter, pipe size;
(4) Operating medium, temperature and pressure range;
(5) Experiment, inspection standards and other requirements;
(6) Various driving devices can be configured in this field according to the special requirements of customers;
If the determined valve type and model are provided by the customer, the customer should correctly explain the meaning and requirements of its model, and sign the contract under the conditions that the supply and demand sides understand and agree.